LCD display for Borg, Johnson Controls and Magneti Marelli on-board computers for Citroën, Fiat, Lancia, Peugeot and Toyota (Positive Version)

LCD display kit 240x64 pixel + PCB adaptable to Borg, Johnson Controls and Magneti Marelli multifunction modules (MFD) of:

• Citroën Berlingo 2nd-gen (models from 2008 to 2018);
• Citroën C3 2nd-gen (models from 2009 to 2016);
• Citroën C3 Picasso (models from 2008 to 2017);
• Citroën C4 1st-gen (models from 2004 to 2010);
• Citroën C5 1st-gen (models from 2001 to 2008);
• Citroën C5 2nd-gen (models from 2008 to 2017);
• Citroën C8 (models from 2002 to 2008);
• Citroën Dispatch 2nd-gen (models from 2007 to 2016);
• Citroën DS3 (models from 2009 to 2016);
• Citroën Jumpy 2nd-gen (models from 2007 to 2016);
• DS 3 (models from 2015 to 2019);
• Fiat Scudo (models from 2007 to 2016);
• Fiat Ulysse (models from 2002 to 2010);
• Lancia Phedra (models from 2002 to 2010);
• Peugeot 206 (models from 2003 to 2009);
• Peugeot 207 (models from 2006 to 2015);
• Peugeot 301 (models since 2012);
• Peugeot 307 (models from 2003 to 2008);
• Peugeot 308 1st-gen (models from 2007 to 2014);
• Peugeot 407 (models from 2004 to 2011);
• Peugeot 508 (models from 2010 to 2013);
• Peugeot 807 (models from 2002 to 2014);
• Peugeot 3008 1st-gen (models from 2008 to 2016);
• Peugeot 5008 1st-gen (models from 2009 to 2016);
• Peugeot RCZ (models from 2009 to 2015);
• Peugeot Expert 2nd-gen (models from 2007 to 2016);
• Peugeot Partner 2nd-gen (models from 2008 to 2018);
• Toyota Proace Mk1 (models from 2013 to 2016).

The kit consists of a printed circuit to be soldered to the dashboard main board and an LCD display with FPC (to be fitted into the PCB connector provided).

Negative version display

Dimensions: 131x46mm

Notes: Check the display against the available codes to ensure the model is correct: SEPDISP28N, SEPDISP28P, SEPDISP29N and SEPDISP29P.

A good level of skill and soldering experience are required to replace the display.